Pedrollo TOP FLOOR

Specifications

OPERATING LIMITS

Maximum operating depth 5m below water level (3m up to 0.55 kW)

Fluid maximum temperature + 40 °C

(+ 90 °C for a maximum period of 3 minutes)

Maximum passage for suspended solids Ø 10mm

Maximum emptying level 14mm from the bottom for TOP 1-2-3

Maximum emptying level 30mm from the bottom for TOP 4-5

Innovative design and advanced technology are incorporated into these new pumps, designed to be easy to use and extremely reliable.

PUMP INSTALLATION AND APPLICATIONS

TOP pumps are suitable for lifting clear water not containing abrasive substances. They have been designed for easy use and are extremely reliable even when subjected to continuous use (subject to correct installation). The motor is fully cooled and has an ample reserve of power plus a double seal system with barrier chamber of bio-degradable oil. The motor and the pump are easily removed, making maintenance and repair simple.

这些泵特别适用于排水flooded areas (basements, garages etc.) emptying swimming pools, tanks and aquariums, waste household water disposal (dishwashers, washing machines), supplying garden fountains, small scale irrigation for gardens in general from collection tanks and emptying sump pits.

PERFORMANCE

When designing performance levels for TOP pumps, special attention was given to typical requirements for domestic usage.

Performance curves specially designed for high delivery rates at the low installed power rating

Curve tolerance according to ISO 2548.

STRUCTURAL CHARACTERISTICS

DELIVERY BODY made from fibreglass reinforced techno-polymer, particularly resistant to mechanical stress, knocks and corrosion, fitted with UNI ISO 228/1 1 inch or 1¼ inch gas threaded vertical delivery port.

SUCTION STRAINER made from fibreglass-reinforced techno-polymer, providing the support base for the pump

Techno-polymer HOSE CONNECTION with screw fitting

General Electric Noryl techno-polymer open IMPELLER

EXTERNAL FLOAT SWITCH for automatic pump operation.

符合美国钢铁协会的416不锈钢电机轴

DOUBLE SEAL SYSTEM carbon / ceramic (or optional silicon carbide hard faced) mechanical seal on the pump side, and lip seal on the motor side. A barrier oil chamber of biodegradable oil lubricates and cools the sealing surfaces in the absence of water.

Sealed induction MOTOR suitable for continuous duty with built-in thermal cutout device (motor protector). INSULATION class F (provides the motor with a considerable overload tolerance and substantially increases the service life of the motor itself). The motor is cooled by the pumped liquid.

PROTECTION IP 68.

UK pumps supplied with 10 metres of cable. Other alternatives on request.